8 Keys RF Controller for RGB strip

Description:

Technical Parameters
● Working temperature: -20-60 ℃
● Supply voltage: DC12V
● Output: 3 channels
● Connecting mode: common anode
● External dimension: L121ΧW53ΧH25 mm
● Packing size: L150ΧW76ΧH51 mm
● Net weight:255g
● Gross weight:285g
● Static power consumption: <1W
● Output current: <4A(each channel)
● Output power: 2V:<144W

Direction for use
1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
2. Adopt film button and RF for controlling,there are 8 buttons in all, the funtion of each key as follows:
(1): you could turn on/off controller at any time;
(2): Play/pause button,it is convenient for you to see the static effection of led;
S(3)+: The step of the speed change add 1 by each pressing;
S-(4): The step of the speed change subtract 1 by each pressing;
B+(5): A brightness control button,the step of the brightness add 1 by each pressing;
B-(6): The step of the brightness subtract 1 by each pressing;
M+(7): The NO. of patterns add 1 by each pressing;(refer to the following form)
M-(8): The NO. of patterns subtract 1 by each pressing;